Beijing HiYi Technology Co., Ltd
Beijing HiYi Technology Co., Ltd
Add to Cart
MIC600 Series gas detector could detect 4 gases at the same time ,and could be used in 24 hours continuous online monitoring of concentrations of multiple types of gases in the filed.
with LED display ,could show the concentration of the gas real-time.
The types for detection are more than 500 types.
With a 4-20 mA analogue output, can be simply integrated into a Distributed Control System (DCS) to provide warnings and enable control of high levels in the working environment.
Strong, durable and explosion-proof shell and fluorocarbon surface treatment process are suitable for the use at a variety of hazardous places and corrosive environments, it is wear-resistant.
Simple calibration procedure.
Easily integrated into a control system.
1.Non-intrusive
2.Flexible output options
Optional configuration: wall mounting bracket, mounting clips for fixation on the pipes (1/2", 3/4" pipe),
stainless steel threaded welding seat or flange to be installed on the pipeline (it is necessary to mark the flange or pipe size, such as DN50, DN15 ...), rain cover, 24VDC or 220AC sampling pump (sampling distance is 10 m), vacuum pump (sampling distance is 40 m), 24V switching power supply, pressure reducing valve, flow meters
3.Rugged and reliable
4.Low cost of ownership
5.Wide range of sensors
◼︎ Accessory for connection with computer for monitoring
①Free upper-level host software, RS485 / RS232 converter
②For laptop without RS232 interface, USB / RS232 converting and connecting cable is needed,
if the network transmission is needed, TCP / IP converter will be further needed.
| Gases to be detected | Arbitrary combination of multiple types of gases such as toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on. Optional configuration: it is possible to simultaneously detect any 1 ~ 6 gases as well as temperature and humidity. | ||||
| Detection range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized. | ||||
| Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm); 0.01ppm (0 ~ 100 ppm), 0.1ppm (0 ~ 1000 ppm), 1ppm (0 ~ 10000 ppm or more), 0.01 mg/l (0 ~ 200 mg/l), 0.1% LEL, 0.01%, 0.001% Vol | ||||
| Detection principle | Depending on the type of gas, range, field environment and user demand, Other sensor can be customized | ||||
| Sensor service life | Electrochemical principle: 2 ~ 3 years PID:2 years Infrared principle: 5 ~ 10 years Catalytic combustion: 3 years Thermal conductivity: 5 years | ||||
| Allowable error | ≤±2% F.S (other or higher precision levels can be customized) | ||||
| Linearity | ≤±1% | Repeatability | ≤±1% | Uncertainty | ≤±1% |
| Response time | T90≤30 seconds | Recovery time | ≤30 seconds | ||
| Working environment | Temperature: -40 ℃ ~ + 70 ℃Humidity: ≤10 ~ 95% RH (regular) | ||||
| Display method | 2.5-inch high-definition color screen | ||||
| Working voltage | 12 ~ 30VDC direct current the standard power supply for a single equipment is 24V, DC stabilized voltage switching power supply of 1A or greater than 1A | ||||
| Power supply reference | 24V, 2.1A is possible to drive 40 units of toxic gas detector, or 15 units of flammable, infrared gas detector. | ||||
| Working method | Fixed type installation, online detection, diffusion type measurement | ||||
| Protection level | IP66 | ||||
| Explosion-proof type | Explosion suppression type | ||||
| Explosion-proof mark | ExdⅡCT6, certificate number: CNEx15.1283 | ||||
| Exterior dimensions | 210×170×85mm (L×H×W) | ||||
| Weight | 1.8Kg | ||||
| Standard accessories | Manual, qualification certificate, warranty card, outer packaging box | ||||