Beijing HiYi Technology Co., Ltd
Beijing HiYi Technology Co., Ltd
Add to Cart
Manual Alarm Point Addressable Fire Alarm System CE ROHS Manual Call Point
D135C Asenware Conventional Manual Call Point
The D135C conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual call points. When the manual call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.
Fire alarm system is mostly used for laying fire system in office and commercial places. Any building needs fire alarm system, which can effectively prevent the occurrence of fire and give warning from the source.
| Model | D135C |
| Main Voltage | Zone 24V or 12V |
| Operating current | monitoring status≤20uA, alarm status≤15mA |
| Application | For indoor use only |
| Wiring | The promise of two bus system(Zone +, Zone -) |
| Protection class | IP30 |
| Indicator | Red alarm indicator flashes when it is under normal condition, press the manual button lit work |
| Environmental | Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing |
| Materials and colors | ABS, red |
| Mating Panel | AW-CFP2166 fire alarm control panel |
| Size | 99mm* 92mm* 66mm(with cover) |
| Weight | About 95g |