
Add to Cart
Gas | Carbon Monoxide | Sensor | Electrochemical |
Range | 0-500,1000,2000ppm Can be customized | Resolution | 0.1 ppm;Can be customized |
Smapling Method | diffusion/pump | Control Method | Controller/lnfrared remote control |
Allowable error | ≤±3%FS;Can be customized | Work Method | 24-hour continuously monitoring |
Response time | T90≤20 seconds;Can be customized | Recovery time | ≤10 seconds;Can be customized |
Working Temp | '-20℃~+70℃;(Standard Values) '-40℃~+80℃;(Limit Value) | Humidity | 10~95%RH |
Voltage | ≤2.5W(DC24V) | Power | 12~30VDC |
Protection level | IP65 | Explosion-proof | Exd Ⅱ CT6 |
Alarm | Audible;Light (option) | Display | LCD/without LCD Display |
Cable | PVVP3*1.0mm 2 | Transmission Distance | ≤1000m |
Installation | Wall-mounted;Ceiling-mounted;Vertical pipe-mounted;Horizontal pipe-mounted | ||
Output | ①Three-wire system 4~20mA standard signal,and it is possible to work with controller module,PLC,DCS system. | ||
②Standard bus RS485(mod bus-RTU)simultaneous output,and it is possible to view the stored data on the computer via RS232 card. | |||
③Two set of relay switch measures ports(upper and lower limits)output:dry contact,capacity 30V 1A,125VAC0.5A. | |||
④Voltage Signal Output:can set 0-5v,0-10v signal output(optional). | |||
⑤Other Output:Frequency,Hart,Wireless,GPRS,NB etc. | |||
Size(mm) | 180*140*92 | Weight(Kg) | 1.6 |
Kit | Manual,qualification certificate,warranty card,outer packaging box |